4421 synthetic high temperature chain oil (t500)
Introduction:
4421 synthetic high temperature chain oil (t500) is a kind of synthetic high temperature chain oil, which is based on high quality synthetic oil and refined with anti oxygen, anti-wear and anti-corrosion additives.
This product is a synthetic high temperature chain oil, which is based on high quality synthetic oil and refined with anti oxygen, anti-wear and anti-corrosion additives.
[performance features]
Good high temperature stability, operating temperature up to 500 ℃;
The lubrication has outstanding wear resistance and can bear heavy load;
Less coking, chain can keep clean for a long time;
High viscosity and temperature performance, easy to start at low temperature, excellent permeability and rejection resistance;
Less volatile, can effectively save lubricating oil, do not pollute the environment, improve working conditions.
[executive standard]
This product meets the following specifications: Q / sh303 150-2004.
[typical data]
Project |
Typical data |
Kinematic viscosity,mm 2 /s |
|
40℃ |
281.8 |
100℃ |
26.1 |
viscosity index |
121 |
Neutralization value,mgKOH/g |
0.18 |
Flash point (open),℃ |
273 |
Freezing point,℃ |
-23 |
Noack evaporation(25CTC, 1h), % |
3.3 |
This product is suitable for the transmission system lubrication of the chain in the high temperature drying room above 300 ℃.
Service temperature range: - 30 ℃ ~ 500 ℃. The base oil has no residue after evaporation at 280 ℃, and solid lubricant is formed for lubrication above 300 ℃.
[products with equivalent performance abroad]
The performance of this product is equivalent to that of "primary fluid special" of knuckle company in Germany and "cl-175" high temperature chain oil of ROCOL company in Britain.
[precautions]
Timely seal the cover after use to avoid the mixing of moisture, dust and other impurities;
When using the lubricating parts in contact with non-metallic materials such as rubber, plastic, paint, etc., the
Conduct material compatibility test;
If you want to change different oil products, you should wait until the oil in the oil tank is used up, and then add another oil.
[packaging]
* 4L iron barrel, 20L plastic barrel, 200L iron barrel. Or according to customer needs for packaging.
Previous:4227 synthetic biphenyl ether heat transfer oil Next:No Data