4203 dehydrated antirust oil
Introduction:
4203 dehydration antirust oil is based on light mineral oil and mixed with a variety of composite additives. It is mainly used for dehydration treatment of ferrous metal surface and inter process rust.
Detailed introduction
summary:
The dehydrated antirust oil is based on light mineral oil and mixed with a variety of composite additives. It is mainly used for the dehydration treatment of ferrous metal surface and inter process rust.
[performance features]
The oil film coating is thin, with strong permeability and certain resistance to damp and heat, which can be made of black metal
Rust prevention between processes;
Excellent water film displacement, can quickly remove the water film on the metal surface.
[executive standard]
The product meets the following specifications: Q / sh303386-2006.
[typical data]
[purpose]
It is applicable to the removal of a small amount of residual water on the surface of steel, copper and electroplated parts after water treatment or cleaning and the process of inter process rust.
[precautions]
Direct dip coating is used to remove a small amount of residual water on the metal surface;
In use, the water or impurities at the bottom of the oil tank shall be removed in time and new oil shall be added;
If the dehydrated products need long-term protection, sealing rust oil shall be used again;
Do not touch the oiled metal parts directly by hand to avoid damaging the formed protective oil film.
[packaging]
20L plastic barrel, 200L iron barrel or packing according to the user's requirements.
The dehydrated antirust oil is based on light mineral oil and mixed with a variety of composite additives. It is mainly used for the dehydration treatment of ferrous metal surface and inter process rust.
[performance features]
The oil film coating is thin, with strong permeability and certain resistance to damp and heat, which can be made of black metal
Rust prevention between processes;
Excellent water film displacement, can quickly remove the water film on the metal surface.
[executive standard]
The product meets the following specifications: Q / sh303386-2006.
[typical data]
|
Project |
R4203Dewatered & antiscale oil |
|
Kinematic viscosity(40℃)，mm 2/s |
2.259 |
|
Flash point (closed)，℃ |
74 |
|
Corrosion test (55C ± 2 ° C, 7D), grade Brass sheet Steel sheet |
1 0 |
|
Water replacement test (steel sheet) |
qualified |
|
Damp heat test (steel sheet, 49 "C ± RC, class a)，d |
12 |
It is applicable to the removal of a small amount of residual water on the surface of steel, copper and electroplated parts after water treatment or cleaning and the process of inter process rust.
[precautions]
Direct dip coating is used to remove a small amount of residual water on the metal surface;
In use, the water or impurities at the bottom of the oil tank shall be removed in time and new oil shall be added;
If the dehydrated products need long-term protection, sealing rust oil shall be used again;
Do not touch the oiled metal parts directly by hand to avoid damaging the formed protective oil film.
[packaging]
20L plastic barrel, 200L iron barrel or packing according to the user's requirements.
Previous:4201 antirust oil Next:4202 long term sealing antirust oil
