7014-1 high temperature grease
Introduction:
7014-1 high temperature grease is a kind of high temperature grease which is thickened with organic thickener and refined with various additives such as anti oxygen and anti-corrosion.
Detailed introduction
summary:
This product is a kind of high temperature grease, which is thickened with organic thickener and refined with various additives such as anti oxygen and anti-corrosion.
[performance features]
Excellent oxidation stability, preventing grease from high temperature deterioration; protecting bearing to reduce wear; excellent high and low temperature performance, ensuring normal operation of bearing in wide temperature range; good water resistance, suitable for bearing lubrication in wet environment; excellent comprehensive performance, ensuring long service life of bearing.
[executive standard]
This product meets the following specifications: GB 11124-89.
[typical data]
[purpose]
It is suitable for high temperature operation of auxiliary boiler rotating nozzle bearing, plastic extruder sleeve bearing, cracking furnace induced draft fan, regeneration gas compressor, stretching stretcher, hot melt fan, heat setting drying room, baking machine, high temperature dyeing cylinder, etc. in large chemical plants The lubrication of rolling bearing and sliding bearing of various rotating machines, and the lubrication of gears, chains and clutches working in high temperature environment. Applicable temperature range: - 40 ℃ ~ + 200 ℃.
[products with equivalent performance abroad]
The performance of this oil is equivalent to that of Japanese Wanshan WR-3, American dow-corring-44.caltcx unitemp grease 550, mobiltmp SHC 100, mobiltmp shc32 and German isoflex NBU 15.
[precautions]
Do not mix with other greases, physical or chemical reactions may occur between different greases
The performance is greatly reduced;
When using the lubricating parts in contact with non-metallic materials such as rubber, plastic, paint, etc., the
Conduct material compatibility test.
[packaging]
1 kg plastic box, 16 kg plastic bucket or packaging according to customer's requirements.
This product is a kind of high temperature grease, which is thickened with organic thickener and refined with various additives such as anti oxygen and anti-corrosion.
[performance features]
Excellent oxidation stability, preventing grease from high temperature deterioration; protecting bearing to reduce wear; excellent high and low temperature performance, ensuring normal operation of bearing in wide temperature range; good water resistance, suitable for bearing lubrication in wet environment; excellent comprehensive performance, ensuring long service life of bearing.
[executive standard]
This product meets the following specifications: GB 11124-89.
[typical data]
|
Project |
Typical data |
|
appearance |
Light brown smooth and even ointment |
|
Working cone penetration (1 / 4 of working cone penetration)，0.1mm |
67 |
|
Drop point，℃ |
316 |
|
Evaporation(200℃ , 1h) , % (m/m) |
2.66 |
|
Pressure oil separation，％ (m/m) |
6.41 |
|
Steel mesh oil separation(100℃, 24h), % (m/m) |
1.65 |
|
Similar viscosity(-30℃，10S-1 )， Pa.s |
653 |
|
Water resistance（38℃±3℃), % (m/m) |
1.83 |
|
Corrosion (sheet 45,100℃ , 3h) |
qualified |
It is suitable for high temperature operation of auxiliary boiler rotating nozzle bearing, plastic extruder sleeve bearing, cracking furnace induced draft fan, regeneration gas compressor, stretching stretcher, hot melt fan, heat setting drying room, baking machine, high temperature dyeing cylinder, etc. in large chemical plants The lubrication of rolling bearing and sliding bearing of various rotating machines, and the lubrication of gears, chains and clutches working in high temperature environment. Applicable temperature range: - 40 ℃ ~ + 200 ℃.
[products with equivalent performance abroad]
The performance of this oil is equivalent to that of Japanese Wanshan WR-3, American dow-corring-44.caltcx unitemp grease 550, mobiltmp SHC 100, mobiltmp shc32 and German isoflex NBU 15.
[precautions]
Do not mix with other greases, physical or chemical reactions may occur between different greases
The performance is greatly reduced;
When using the lubricating parts in contact with non-metallic materials such as rubber, plastic, paint, etc., the
Conduct material compatibility test.
[packaging]
1 kg plastic box, 16 kg plastic bucket or packaging according to customer's requirements.
