7414 Gun Gear Grease
Introduction:
7414 Gun Gear Grease
Detailed introduction
summary:
This product is made by thickening synthetic oil with organic thickener, adding various additives such as anti-wear, extreme pressure, anti-oxygen, anti-corrosion and adhesive performance improver for ordnance equipment.
[performance features]
The product has excellent extreme pressure, anti-wear and anti rust performance, small evaporation loss, excellent high and low temperature performance, lubrication performance and good adhesion performance. Compared with foreign similar products, the high and low temperature performance is better than foreign similar products.
[executive standard]
This product conforms to Q / sh 037 · 172-96 standard.
[typical data]
[purpose]
This product is suitable for the sealing lubrication of medium and heavy load universal joint bearings, as well as the lubrication of large gears and tooth arcs of construction machinery under similar working conditions.
[products with equivalent performance abroad]
The performance of this oil is equivalent to that of the original West German product moykote G.
[application scope]
Applicable temperature range: - 45 ℃ ~ + 150 ℃.
[precautions]
This product should not be mixed with other oils. Before use, the greased parts shall be cleaned and air dried before application
This product.
This product should be stored in a clean, dry and dark place. After use, the end of the barrel shall be tight in time to avoid mixing
Impurities, affecting the use effect.
[packaging]
One kg plastic box or packing according to customer's requirements.
This product is made by thickening synthetic oil with organic thickener, adding various additives such as anti-wear, extreme pressure, anti-oxygen, anti-corrosion and adhesive performance improver for ordnance equipment.
[performance features]
The product has excellent extreme pressure, anti-wear and anti rust performance, small evaporation loss, excellent high and low temperature performance, lubrication performance and good adhesion performance. Compared with foreign similar products, the high and low temperature performance is better than foreign similar products.
[executive standard]
This product conforms to Q / sh 037 · 172-96 standard.
[typical data]
|
Project |
Quality index |
|
appearance |
Black smooth and even ointment |
|
1/4Conicity，0.1mm |
58～70 |
|
Drop point，℃ |
Not less than 300 |
|
Pressure oil separation，％（m/m） Not greater than |
8.0 |
|
Evaporation（150℃），％（m/m） Not greater than |
4.0 |
|
Similar viscosity(-40℃，10S-1 )， Pa.s Not greater than |
1500 |
|
Corrosion resistance, grade no more than |
2 |
|
Bearing capacity (normal temperature, 1500rpm) |
N |
|
The maximum non seizure load Pb, n is not less than |
686 |
|
Sintering load Pd, n not less than |
3089 |
This product is suitable for the sealing lubrication of medium and heavy load universal joint bearings, as well as the lubrication of large gears and tooth arcs of construction machinery under similar working conditions.
[products with equivalent performance abroad]
The performance of this oil is equivalent to that of the original West German product moykote G.
[application scope]
Applicable temperature range: - 45 ℃ ~ + 150 ℃.
[precautions]
This product should not be mixed with other oils. Before use, the greased parts shall be cleaned and air dried before application
This product.
This product should be stored in a clean, dry and dark place. After use, the end of the barrel shall be tight in time to avoid mixing
Impurities, affecting the use effect.
[packaging]
One kg plastic box or packing according to customer's requirements.
Previous:7409-1 thread lubricating grease for drilling tools Next:7602 high temperature sealant
