7908 conductive grease
Introduction:
7908 conductive grease is made by thickening synthetic oil with inorganic thickener and adding anti-oxidation, anti rust, anti-corrosion and conductive agent. It belongs to a kind of grease with excellent conductivity.
Detailed introduction
summary:
This product is made by thickening synthetic oil with inorganic thickener, adding anti-oxidation, anti rust, anti-corrosion and conductive agent. It belongs to a kind of grease with excellent conductivity.
[performance features]
Low resistance, good conductive effect, can prevent electric arc; excellent oxidation resistance, long service life; excellent corrosion resistance, long-term metal contact will not rust; non toxic, biodegradable, green lubricant.
[executive standard]
The product meets the following specifications: zd.121-2001.
[typical data]
[purpose]
It is applicable to the conduction and protection of electrical switches, electrified lines, electrolytic cells in smelters, etc.; it is applicable to the isolation switches, circuit breakers, instruments, electrical appliances, lubrication and protection; the service temperature: - 40 ℃ ~ 200 ℃.
[precautions]
One layer can be applied directly on the use part;
Clean and wipe the greasing part before use;
During use and storage, impurities shall be prevented from mixing.
[packaging]
1 kg plastic box, 16 kg plastic bucket or packaging according to customer's requirements.
This product is made by thickening synthetic oil with inorganic thickener, adding anti-oxidation, anti rust, anti-corrosion and conductive agent. It belongs to a kind of grease with excellent conductivity.
[performance features]
Low resistance, good conductive effect, can prevent electric arc; excellent oxidation resistance, long service life; excellent corrosion resistance, long-term metal contact will not rust; non toxic, biodegradable, green lubricant.
[executive standard]
The product meets the following specifications: zd.121-2001.
[typical data]
|
Project |
Typical data |
|
appearance |
Black even cream |
|
Conicity，0.1mm |
272 |
|
Drop point，℃ |
nothing |
|
density（20℃ ），g/cm 3 |
1.12 |
|
Corrosion (T3 copper,100℃*3h） |
qualified |
|
Resistivity 10-9 / ohm cm |
2.1 |
It is applicable to the conduction and protection of electrical switches, electrified lines, electrolytic cells in smelters, etc.; it is applicable to the isolation switches, circuit breakers, instruments, electrical appliances, lubrication and protection; the service temperature: - 40 ℃ ~ 200 ℃.
[precautions]
One layer can be applied directly on the use part;
Clean and wipe the greasing part before use;
During use and storage, impurities shall be prevented from mixing.
[packaging]
1 kg plastic box, 16 kg plastic bucket or packaging according to customer's requirements.
Previous:7906 high speed bit grease Next:Lw-1000 high temperature thread anti sticking agent
