4431 spindle oil
Introduction:
4431 main shaft oil is made up of deeply refined lubricating oil as base oil, high-quality kerosene (or transformer oil), anti oxygen, anti rust, anti-wear, anti foam and other additives.
Detailed introduction
summary:
This series of products is made up of deeply refined lubricating oil as base oil, high quality kerosene (or transformer oil), anti oxygen, anti rust, anti-wear, anti foam and other additives.
[performance features]
This series of products have good lubrication, anti-wear and anti foam properties, effectively reducing the temperature rise of the main shaft,
Extend the service life of spindle and equipment.
The viscosity of this series of products is low, with certain rust and wear resistance, good heat dissipation and lubricity
OK. It is a special transparent oil for precision machine tool spindle.
[executive standard]
The product meets the following specifications: SH / T 0017-1990;
[typical data]
[purpose]
This series of products are used for the lubrication of sliding bearing, main bearing and high-speed spindle of precision machine tool, and also for the lubrication of rolling bearing with a daily speed of 1000-3000 rpm, such as grinding machine and other machine tools.
[precautions]
When using this series of products, the containers and oil filling tools must be cleaned first to prevent mixing with water
Oil scale, so as not to affect the use effect;
This product is suitable for indoor storage to prevent rainwater and impurities from mixing.
[packaging]
20L plastic, 200L plastic barrel or packaging according to customer's requirements.
This series of products is made up of deeply refined lubricating oil as base oil, high quality kerosene (or transformer oil), anti oxygen, anti rust, anti-wear, anti foam and other additives.
[performance features]
This series of products have good lubrication, anti-wear and anti foam properties, effectively reducing the temperature rise of the main shaft,
Extend the service life of spindle and equipment.
The viscosity of this series of products is low, with certain rust and wear resistance, good heat dissipation and lubricity
OK. It is a special transparent oil for precision machine tool spindle.
[executive standard]
The product meets the following specifications: SH / T 0017-1990;
[typical data]
|
Project |
Tentative indicators |
|||
|
N2 |
N5 |
N7 |
N15 |
|
|
Kinematic viscosity（40℃），mm 2 /s |
2.0-2.4 |
4.2-5.1 |
6.2-7.5 |
13.5-16.5 |
|
Viscosity index not less than |
85 | 85 | 90 | 90 |
|
Water soluble acid or alkali |
nothing |
nothing |
nothing |
nothing |
|
Flash point (closed), ℃ not less than |
60 | 80 | 90 | 110 |
|
Freezing point， ℃ |
-15 |
-15 |
-15 |
-15 |
|
Moisture (quantitative method) |
nothing |
nothing |
nothing |
nothing |
|
Mechanical impurities |
nothing |
nothing |
nothing |
nothing |
|
Corrosion (T3 copper 100 ℃, 3 hours) |
(50℃)qualified |
qualified |
qualified |
qualified |
|
Liquid phase corrosion (distilled water) |
qualified |
qualified |
qualified |
qualified |
|
Maximum no seizure load（PB）N（kg5） |
441 (45) |
441 (45) |
441 (45) |
441 (50) |
This series of products are used for the lubrication of sliding bearing, main bearing and high-speed spindle of precision machine tool, and also for the lubrication of rolling bearing with a daily speed of 1000-3000 rpm, such as grinding machine and other machine tools.
[precautions]
When using this series of products, the containers and oil filling tools must be cleaned first to prevent mixing with water
Oil scale, so as not to affect the use effect;
This product is suitable for indoor storage to prevent rainwater and impurities from mixing.
[packaging]
20L plastic, 200L plastic barrel or packaging according to customer's requirements.
