M0618 stainless steel warm (cold) upsetting forming oil
Introduction:
The warm upsetting forming oil is based on the deep refined mineral oil and mixed with various functional additives.
The warm upsetting forming oil is based on the deep refined mineral oil and mixed with various functional additives.
Performance characteristics
Good anti-wear, permeability, strong shrinkage without noise, into the mold smoothly. There is no workpiece galling and scratch, effectively extending the service life of the punch.
No corrosiveness to workpiece, no irritation to skin, friendly to environment.
Executive standard
Q/SH303391-2006
Typical data
|
Stainless steel warm upsetting forming oil |
||
M0618A | M0618B | M0618C | |
appearance | Golden clear liquid | Golden clear liquid |
Golden clear liquid |
Kinematic viscosity(40℃)/mm2/s |
150 | 150 | 150 |
Flash point (open)/℃ |
190 |
200 |
210 |
Freezing point℃ | -10 | -12 | -14 |
copper corrosion100℃ 3h | -4a |
-4a |
-4a |
M0618a: suitable for isothermal upsetting and forming of stainless steel hexagon, standard nut and standard nut.
M0618b: it is suitable for large deformation warm upsetting processing of stainless steel sleeve, rivet nut, water heating valve, pipe fitting, etc.
M0620c: instead of imported oil, it is suitable for warm upsetting of stainless steel sleeve, rivet nut, water heating valve, pipe fitting and other large deformation.
matters needing attention
Store it in a clean and dry place, cover it tightly in time after use, and pay attention to cleaning during application to avoid impurities. Do not mix with other oil products.
packing
200L Tietong or packed according to the needs of users.
Previous:No Data Next:M3018 water based cutting fluid