M0583 stainless steel drawing oil
Introduction:
M0583 stainless steel drawing oil is based on highly refined high viscosity mineral oil and mixed with a variety of functional additives. It has good extreme pressure and wear resistance and excellent adhesion. It is applicable to the drawing process
Detailed introduction
summary:
M0583 stainless steel drawing oil is based on highly refined high viscosity mineral oil and mixed with a variety of functional additives. It has good extreme pressure and wear resistance and excellent adhesion. It is applicable to the drawing process of stainless steel and other difficult to process materials with fast drawing speed and large deformation.
[performance features]
Good extreme pressure lubrication performance can prolong the service life of abrasive tools;
Good demoulding performance, no jamming, ensure smooth edge of workpiece without burr.
[executive standard]
This product meets the following specifications: Q / sh303384-2005.
[typical data]
[purpose]
It is suitable for the drawing process of stainless steel and other hard to process materials under harsh conditions, and can meet the drawing process lubrication requirements of stainless steel with high drawing speed and large deformation.
[precautions]
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
200L iron barrel or packing according to the user's requirements.
M0583 stainless steel drawing oil is based on highly refined high viscosity mineral oil and mixed with a variety of functional additives. It has good extreme pressure and wear resistance and excellent adhesion. It is applicable to the drawing process of stainless steel and other difficult to process materials with fast drawing speed and large deformation.
[performance features]
Good extreme pressure lubrication performance can prolong the service life of abrasive tools;
Good demoulding performance, no jamming, ensure smooth edge of workpiece without burr.
[executive standard]
This product meets the following specifications: Q / sh303384-2005.
[typical data]
|
Project |
M0583 Stainless steel drawing oil |
|
appearance |
Brown red transparent |
|
Kinematic viscosity（40℃)mm 2 /s |
309 |
|
Flash point (open)，℃ |
216 |
|
copper corrosion（100C，3h) |
qualified |
|
Oil film strength（Pb)，N |
981 |
|
Maximum no seizure load（Pd)，N |
7845 |
It is suitable for the drawing process of stainless steel and other hard to process materials under harsh conditions, and can meet the drawing process lubrication requirements of stainless steel with high drawing speed and large deformation.
[precautions]
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
200L iron barrel or packing according to the user's requirements.
Previous:M0621 stamping drawing oil (aluminum, stainless steel) Next:M0010 grinding oil
