M0311b stamping oil for auto parts
Introduction:
Detailed introduction
summary:
M0311b automotive parts stamping oil is based on refined mineral oil and mixed with a variety of selected additives. It is suitable for lubrication in stamping and forming process of various automotive parts. It can avoid rust prevention treatment between processes and realize oil welding, with good cost performance ratio.
[performance features]
It has good extreme pressure lubricity and can prolong the service life of the mould;
It has good demoulding performance, no jamming, and ensures that the edge of the workpiece is smooth and free of burrs; it has good anti rust and anti-corrosion performance, and can avoid anti rust treatment in the workshop.
[executive standard]
This product conforms to zd.203-2005 standard.
[typical data]
[purpose]
It can be widely used in stamping and forming process of various auto parts and components; it can be used in stamping and forming process of carbon steel and stainless steel plate, and can avoid rust prevention treatment between processes.
[precautions]
The product can be applied by brush or spray;
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
200L iron barrel or packing according to the user's requirements.
M0311b automotive parts stamping oil is based on refined mineral oil and mixed with a variety of selected additives. It is suitable for lubrication in stamping and forming process of various automotive parts. It can avoid rust prevention treatment between processes and realize oil welding, with good cost performance ratio.
[performance features]
It has good extreme pressure lubricity and can prolong the service life of the mould;
It has good demoulding performance, no jamming, and ensures that the edge of the workpiece is smooth and free of burrs; it has good anti rust and anti-corrosion performance, and can avoid anti rust treatment in the workshop.
[executive standard]
This product conforms to zd.203-2005 standard.
[typical data]
|
Project |
M0311BAutomotive parts stamping oil |
|
appearance |
Brown transparent |
|
Kinematic viscosity（40℃)mm 2 /s |
109.8 |
|
Flash point (open)，℃ |
194 |
|
Sheet corrosion（100C，3h) |
qualified |
|
Pour point，℃ |
一9 |
|
friction coefficient（SRV) |
0.180 |
It can be widely used in stamping and forming process of various auto parts and components; it can be used in stamping and forming process of carbon steel and stainless steel plate, and can avoid rust prevention treatment between processes.
[precautions]
The product can be applied by brush or spray;
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
200L iron barrel or packing according to the user's requirements.
Previous:M0621 stamping drawing oil (aluminum, stainless steel) Next:M0361 stamping oil
