M0053 gear processing oil
Introduction:
M0053 gear processing oil is based on the deep refined mineral oil and mixed with a variety of selected functional additives. It is suitable for the lubrication of gear cutting, grinding and other processing processes with fast processing speed, and
Detailed introduction
summary:
Gear processing oil is based on the deep refined mineral oil and mixed with a variety of selected functional additives. It is suitable for the lubrication of gear cutting, grinding and other processing processes with fast processing speed, and can effectively reduce the oil mist concentration in the metal processing process. The product is divided into three grades of m0053, m0053b and m0013 according to the kinematic viscosity at 40 ℃.
[performance features]
Good extreme pressure and wear resistance can improve the precision and finish of the workpiece;
Good cooling performance, can extend the service life of the tool;
The concentration of oil mist in machining workshop is 50% lower than that of common cutting oil;
M0053, m0053b gear processing oil does not contain active sulfur, light color and light smell.
[executive standard]
This product meets the following specifications: Q / sh303389-2006.
[typical data]
[purpose]
Applicable to cutting and grinding processes with fast processing speed, such as hobbing, shaving, etc., which can be effective
Reduce the concentration of oil mist in metal processing;
M0053 and m0053b gear processing oils are suitable for cutting ferrous and non-ferrous metals;
M0013 gear processing oil is mainly suitable for ferrous metal cutting with high load, not suitable for
Lubrication process of copper and copper alloy materials.
[precautions]
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
200L iron barrel or packing according to the user's requirements.
Gear processing oil is based on the deep refined mineral oil and mixed with a variety of selected functional additives. It is suitable for the lubrication of gear cutting, grinding and other processing processes with fast processing speed, and can effectively reduce the oil mist concentration in the metal processing process. The product is divided into three grades of m0053, m0053b and m0013 according to the kinematic viscosity at 40 ℃.
[performance features]
Good extreme pressure and wear resistance can improve the precision and finish of the workpiece;
Good cooling performance, can extend the service life of the tool;
The concentration of oil mist in machining workshop is 50% lower than that of common cutting oil;
M0053, m0053b gear processing oil does not contain active sulfur, light color and light smell.
[executive standard]
This product meets the following specifications: Q / sh303389-2006.
[typical data]
|
Project |
Gear processing oil |
||
|
M0053 |
M0053B |
M0013 |
|
|
Kinematic viscosity（40℃)mm 2 /s |
16.45 |
14.82 |
26.18 |
|
Flash point (open)，℃ |
174 |
166 |
178 |
|
Corrosion test (100C, 3H) 45 steel sheet
|
qualified
|
qualified
|
qualified
|
|
Maximum no seizure load (PB), n |
>755 |
>559 |
>726 |
Applicable to cutting and grinding processes with fast processing speed, such as hobbing, shaving, etc., which can be effective
Reduce the concentration of oil mist in metal processing;
M0053 and m0053b gear processing oils are suitable for cutting ferrous and non-ferrous metals;
M0013 gear processing oil is mainly suitable for ferrous metal cutting with high load, not suitable for
Lubrication process of copper and copper alloy materials.
[precautions]
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
200L iron barrel or packing according to the user's requirements.
Previous:M0621 stamping drawing oil (aluminum, stainless steel) Next:M0017a honing oil
