M0088 high speed deep hole drilling oil
Introduction:
M0088 high speed deep hole drilling oil is based on the deep refined mineral oil and mixed with a variety of functional additives. The product is divided into three brands of m0088, m0088a and m0088b according to the kinematic viscosity and performan
Detailed introduction
summary:
The high-speed deep hole drilling oil is based on the deep refined mineral oil and mixed with a variety of functional additives. The product is divided into m0088, m0088a and m0088b according to the kinematic viscosity and performance difference at 40 ℃.
[performance features]
The excellent extreme pressure can prevent the mould from sintering and meet the requirements of deep hole drilling and processing technology;
Good lubricity and cooling, so as to extend the service life of the tool;
It has certain antirust property and can meet the antirust requirements among processing procedures;
Good chip removal can improve drilling efficiency;
M0088b high speed deep hole drilling oil is chlorine free and has low odor.
[executive standard]
This product meets the following specifications: Q / sh303375-2007.
[typical data]
[purpose]
It is suitable for the lubrication of various gun drills (deep hole drills) and gun drills (single shaft and multi shaft), especially for the drilling of alloy steel, stainless steel and other difficult materials. It can also be used for general metal cutting and broaching. But it is not suitable for the lubrication process of copper and copper alloy materials.
[precautions]
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
200L iron barrel or packing according to the user's requirements.
The high-speed deep hole drilling oil is based on the deep refined mineral oil and mixed with a variety of functional additives. The product is divided into m0088, m0088a and m0088b according to the kinematic viscosity and performance difference at 40 ℃.
[performance features]
The excellent extreme pressure can prevent the mould from sintering and meet the requirements of deep hole drilling and processing technology;
Good lubricity and cooling, so as to extend the service life of the tool;
It has certain antirust property and can meet the antirust requirements among processing procedures;
Good chip removal can improve drilling efficiency;
M0088b high speed deep hole drilling oil is chlorine free and has low odor.
[executive standard]
This product meets the following specifications: Q / sh303375-2007.
[typical data]
|
Project |
High speed deep hole drilling oil |
||
|
M0088 |
M0088A |
M0088B |
|
|
Kinematic viscosity（40℃)mm 2 /s |
10.89 |
16.12 |
9.87 |
|
Flash point (open)，℃ |
175 |
184 | 175 |
|
Pour point，℃ |
-12 |
-12 |
-12 |
|
Corrosion test (45 × steel sheet, 100 ℃, 3H) |
qualified |
qualified |
qualified |
|
Maximum bite free load (PB), n |
834 | 755 |
1118 |
It is suitable for the lubrication of various gun drills (deep hole drills) and gun drills (single shaft and multi shaft), especially for the drilling of alloy steel, stainless steel and other difficult materials. It can also be used for general metal cutting and broaching. But it is not suitable for the lubrication process of copper and copper alloy materials.
[precautions]
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
200L iron barrel or packing according to the user's requirements.
Previous:M0621 stamping drawing oil (aluminum, stainless steel) Next:M0017a honing oil
