M3018 water based cutting fluid (green)
Introduction:
M3018 water based cutting fluid (green)
Detailed introduction
summary:
M3018 series water-based cutting fluid is a fully synthetic metal processing fluid, which is made of a variety of high-quality water-soluble functional additives and is suitable for the cooling and lubrication of ferrous and non-ferrous metal cutting. This product is divided into m3018 and m3018a according to the different performance.
[performance features]
The liquid used is green transparent liquid, which is convenient to observe the processing of metal workpiece;
There is no bubble or oil mist during processing, and it has no effect on the paint of machine tool;
It does not contain nitrite, sulfur, phosphorus, chlorine, phenol and other elements, and has no thorns on the skin and eyes
Exciting.
[executive standard]
This product conforms to Q / sh303376-2006 standard.
[typical data]
[purpose]
It is suitable for antirust, cooling and lubrication of machining processes such as turning and milling of ferrous and non-ferrous metals,
After processing, the parts will not be salted out in the storage process and the subsequent surface treatment process; ◎ m3018a cutting fluid has excellent rust resistance and can also be used as water-based rust inhibitor;
The recommended concentration is 3% - 10%.
[precautions]
Clean the equipment before using the product, and pay attention to prevent new oil pollution;
The hardness of dilution water shall be controlled at 200 μ g / g.
[packaging]
20L plastic barrel, 200L iron barrel or packaging according to the user's requirements.
M3018 series water-based cutting fluid is a fully synthetic metal processing fluid, which is made of a variety of high-quality water-soluble functional additives and is suitable for the cooling and lubrication of ferrous and non-ferrous metal cutting. This product is divided into m3018 and m3018a according to the different performance.
[performance features]
The liquid used is green transparent liquid, which is convenient to observe the processing of metal workpiece;
There is no bubble or oil mist during processing, and it has no effect on the paint of machine tool;
It does not contain nitrite, sulfur, phosphorus, chlorine, phenol and other elements, and has no thorns on the skin and eyes
Exciting.
[executive standard]
This product conforms to Q / sh303376-2006 standard.
[typical data]
|
Project |
M3018cutting fluid(10%) |
M3018Acutting fluid(5%) |
|
pH value |
8.2 |
8.2 |
|
Defoaming property（10min)，mL |
1 | 1 |
|
Defoaming performance（35C±2C，monolithic，48h) |
qualified |
qualified |
|
Rust proof test of iron filter paper（2h) |
qualified |
qualified |
It is suitable for antirust, cooling and lubrication of machining processes such as turning and milling of ferrous and non-ferrous metals,
After processing, the parts will not be salted out in the storage process and the subsequent surface treatment process; ◎ m3018a cutting fluid has excellent rust resistance and can also be used as water-based rust inhibitor;
The recommended concentration is 3% - 10%.
[precautions]
Clean the equipment before using the product, and pay attention to prevent new oil pollution;
The hardness of dilution water shall be controlled at 200 μ g / g.
[packaging]
20L plastic barrel, 200L iron barrel or packaging according to the user's requirements.
Previous:M0621 stamping drawing oil (aluminum, stainless steel) Next:M4903 metal cutting emulsified oil
