summary:
M1019 synthetic cutting paste is made of refined mineral oil and anionic surfactant. It is suitable for cooling and lubricating in the process of cutting and drawing ferrous metal workpieces. The recommended concentration is 5% - 10%.
[performance features]
The emulsion mixed with water has the properties of cooling, lubricating, washing and anticorrosion. It is a general cooling lubricant for metal cutting.
[executive standard]
This product conforms to Q / sh303039-2006 standard.
[typical data]

Project		U8132Fast bright quenching oil
Kinematic viscosity（40℃)mm 2 /s		34
Flash point (open)，℃		210
water content		nothing
Corrosion a copper, 100 "C, 3H), grade		1
Pour point, ℃		-9
Cooling characteristics (SH/T 0220)	Characteristic temperature, ℃	630
	800"C~400"Ctime，s	3.6

[purpose]
It is mainly used for the cooling and lubrication of ferrous metal parts in the processing process, and can also be used as non-ferrous metal wire rod
Drawing lubricant;
The recommended dilution concentration is 5% - 10%.
[precautions]
This product should not be mixed with other metal processing oil;
When blending the emulsion, the product should be adjusted to a liquid form with a small amount of hot water and then diluted to the desired concentration in cold water.
[packaging]
15kg plastic bucket, 175KG iron bucket or packaging according to the user's requirements.

Previous:M0621 stamping drawing oil (aluminum, stainless steel) Next:M3012 synthetic grinding fluid