M0012 copper wire drawing emulsified oil
Introduction:
M0012 copper wire drawing emulsified oil is made up of deep refined mineral oil as base oil, emulsified, antirust and other functional additives.
Detailed introduction
summary:
This product is made up of deep refined mineral oil as base oil, emulsified, antirust and other functional additives.
[performance features]
This product has good lubrication, cooling, rust prevention and self emulsification properties.
[executive standard]
This product meets the following specifications: Q / sh303473-2006.
[typical data]
[purpose]
It is widely used in the drawing process of copper rod, copper wire and copper wire in the wire and cable industry, which is conducive to improving the service life of the mold and the surface finish of the copper products. This product does not contain chlorine, sulfur, sodium nitrite and phosphorus, no stimulation to the skin, and is harmless to the environment.
[precautions]
Directly dilute with soft water or tap water, recommended concentration: copper rod 10-20%, copper wire
8-10%, copper wire 3-8%;
Do not mix with other oil or liquid to avoid affecting the use effect;
It shall be stored in a cool and airtight place, with a validity period of one year. In case of continuous humid and high temperature weather, it shall be shortened
Storage period.
[packaging]
In 20L plastic barrel or 200L iron barrel.
This product is made up of deep refined mineral oil as base oil, emulsified, antirust and other functional additives.
[performance features]
This product has good lubrication, cooling, rust prevention and self emulsification properties.
[executive standard]
This product meets the following specifications: Q / sh303473-2006.
[typical data]
|
Project |
Typical data |
|
appearance（15~35℃） |
Brown clear liquid |
|
PH value of emulsion |
9.3 |
|
Emulsion stability (oil evolution / Soap / emulsion state) |
0/0/E |
|
Emulsion corrosion test 45#St 24h H 62 Cu 6h |
Level 1
|
|
Emulsion antirust test single cast iron 24h |
qualified |
It is widely used in the drawing process of copper rod, copper wire and copper wire in the wire and cable industry, which is conducive to improving the service life of the mold and the surface finish of the copper products. This product does not contain chlorine, sulfur, sodium nitrite and phosphorus, no stimulation to the skin, and is harmless to the environment.
[precautions]
Directly dilute with soft water or tap water, recommended concentration: copper rod 10-20%, copper wire
8-10%, copper wire 3-8%;
Do not mix with other oil or liquid to avoid affecting the use effect;
It shall be stored in a cool and airtight place, with a validity period of one year. In case of continuous humid and high temperature weather, it shall be shortened
Storage period.
[packaging]
In 20L plastic barrel or 200L iron barrel.
Previous:M0621 stamping drawing oil (aluminum, stainless steel) Next:M0017a honing oil
