7607 air brake system sealing grease
Introduction:
7607 air brake system sealing grease is a kind of vehicle brake system sealing grease, which is thickened with a mixture of soap based thickeners and refined with anti oxygen, anti-corrosion and other additives.
The product is a vehicle brake system sealing grease, which is thickened with a mixture of soap based thickeners and refined with anti oxygen, anti-corrosion and other additives.
[performance features]
Good high and low temperature performance to ensure the normal operation of the use part in a wide temperature range;
Good oxidation stability to protect the long-term normal lubrication and sealing of the used parts;
Good colloidal stability ensures stable lubrication and sealing of the parts to be used;
Good adaptability of NBR to ensure that the swelling or shrinkage of NBR parts in the use position is within
Within the appropriate tolerance;
Good water resistance, suitable for use in humid environment.
[executive standard]
The product meets the following specifications: Q / sh303142-2004 standard.
[typical data]
Project |
Typical data |
appearance |
Tawny smooth and even ointment |
Worked Cone Penetration,0. 1mm |
333 |
Drop point,℃ |
204 |
Steel mesh oil separation(40℃, 18h), % (m/m) |
0.31 |
Evaporation(150℃, 1h), % (m/m) |
0.86 |
Copper strip corrosion (T2 copper strip, 120 ℃, 3H), grade |
1b |
Similar viscosity(-4CTC, 10S -M), Pa-s |
1073 |
Water resistance(79℃ 土 1℃),%(m/m) |
1.92 |
This product is suitable for rubber piston and cylinder with wide air width in air brake system of various heavy vehicles and other motor vehicles
Lubrication and sealing between walls.
Applicable temperature range: - 40 ℃ ~ + 100 ℃, short-term applicable to + 150 ℃.
[precautions]
This product should not be mixed with other oils. When using, clean the parts to be used and refill the notebook
Products;
After use, the cover shall be closed tightly in time to avoid impurities affecting the use effect;
When using the grease, pay attention to whether the selected rubber can match the product. If necessary, it can be made in the manufacturer
Use under guidance;
This product should be stored in a clean, dry and dark place.
[packaging]
1 kg plastic box, 16 kg plastic bucket or packaging according to customer's requirements.
Previous:The fourth generation oil of 4440 railway diesel locomotive Next:4404 synthetic heavy duty vehicle gear oil