summary:
The product is refined with synthetic oil as base oil and additives such as anti oxygen, anti-wear, anti rust and anti-corrosion. According to 40 ℃ kinematic viscosity, the product is divided into eight brands, namely 100, 150, 220, 320, 460, 680, 1000 and 1500.
[performance features]
This product has ultra-low friction coefficient, excellent bearing capacity, excellent viscosity temperature performance and rust prevention
Corrosion resistance, high temperature detergency and low temperature fluidity;
It is easy to start at low temperature and has no corrosion to the copper worm gear. Generally, it can reduce the power consumption of the worm gear pair by 30%. It can greatly extend the service life of the worm gear pair. It does not produce carbon deposit and coke quality in long-term use at high temperature;
Under normal conditions, the oil change period can reach 30000 hours.
[typical data]

Project	4409 Synthetic industrial worm gear lubricant
	100	150	220	320	460	680	1000	1500
appearance	Yellow to reddish brown clear liquid
Kinematic viscosity(40℃)，mm 2 /s	90～110	135～165	198～242	288～352	414～506	612～748	900～1100	1350～1650
Viscosity index not less than	220			230			250
Pour point, ℃ not higher than	-35		-30			-25		-20
Flash point (opening), ℃ not less than	230	240

[products with equivalent performance abroad]
In terms of application, it has the same performance as Mobil clygoyle he series, BP ener syn sg-xp series and Kluber synth gh6 series.
[application scope]
This product is especially suitable for the lubrication of industrial worm gear mechanism under the conditions of high temperature, high load and low temperature and cold area. It is suitable for lubrication of all kinds of medium and high speed, medium load closed industrial gears, sliding and rolling bearings. Applicable temperature range: - 40 ℃ ~ + 180 ℃.
[precautions]
When the service temperature is within 100 ℃, use the nitrile rubber seal. When the continuous temperature is high, it is recommended to use the fluororubber or silicone rubber seal. If the ordinary industrial paint is not suitable for this product, it is recommended to use the epoxy resin or modified phenolic resin paint. The oil level gauge or oil level window should use the ordinary glass or polyamide material.
If it is used for the first time, clean the system and do not mix it with other oil products;
[packaging]
* 4L iron barrel, 20L plastic barrel, 200L iron barrel.

Previous:4407 semi synthetic heavy duty gear oil Next:Full synthetic AP-HD micro pitting resistant industrial gear oil