4637 high viscosity index hydraulic oil
Introduction:
4637 high viscosity index hydraulic oil is refined from refined mineral oil and synthetic oil by adding various additives such as oxygen resistance, rust resistance, corrosion resistance and anti foam. It is divided into 15 grades, 32, 46, 68, 100 fi
Detailed introduction
summary:
This product is refined with mineral oil and synthetic oil as base oil and added with additives such as oxygen resistance, rust resistance, corrosion resistance and anti foam. It is classified into 15, 32, 46, 68, 100 five grades according to the kinematic viscosity center value at 40 degrees C.
[performance features]
This product is a kind of antiwear hydraulic oil with high viscosity index. Its performance is equivalent to shc500 series antiwear hydraulic oil of Mobil company, and it can be used in a wide temperature range.
[executive standard]
This product conforms to Q / sh037 · 189-97 standard.
[typical data]
[purpose]
This product is suitable for the hydraulic system of gear pump, piston pump, vane pump, various clutches, oil pressure control system, hydraulic system and guide rail, especially for the hydraulic system with harsh operating conditions and permanent seal. Applicable temperature range: - 20 ℃ ~ + 120 ℃.
[products with equivalent performance abroad]
This product has the same performance as Mobil shc500.
[precautions]
This product should not be mixed with other oil products, and the original oil products in the hydraulic system should be discharged before use
After washing, refill the product;
During storage, transportation and use, pay attention to prevent harmful substances such as moisture and dust from mixing.
[packaging]
* 4L plastic barrel, 20L, 200L iron barrel.
This product is refined with mineral oil and synthetic oil as base oil and added with additives such as oxygen resistance, rust resistance, corrosion resistance and anti foam. It is classified into 15, 32, 46, 68, 100 five grades according to the kinematic viscosity center value at 40 degrees C.
[performance features]
This product is a kind of antiwear hydraulic oil with high viscosity index. Its performance is equivalent to shc500 series antiwear hydraulic oil of Mobil company, and it can be used in a wide temperature range.
[executive standard]
This product conforms to Q / sh037 · 189-97 standard.
[typical data]
|
Project |
quality index |
||||
|
15Number |
32Number |
46Number |
68Number |
100Number |
|
|
appearance |
Light yellow transparent liquid |
||||
|
Kinematic viscosity(40℃)，mm 2 /s |
13.5-16.5 |
28.8-35.2 |
41.4-50.6 |
61.2-74.8 |
90-110 |
|
Viscosity index not less than |
140 |
||||
|
Flash point (opening), ℃ not less than |
166 |
200 |
210 | 220 | |
|
Freezing point, ℃ not higher than |
-30 |
||||
|
Foam characteristics，ml/ml 24℃ Not greater than 93℃ Not greater than after24℃ Not greater than |
100/0 100/0 100/0 |
||||
This product is suitable for the hydraulic system of gear pump, piston pump, vane pump, various clutches, oil pressure control system, hydraulic system and guide rail, especially for the hydraulic system with harsh operating conditions and permanent seal. Applicable temperature range: - 20 ℃ ~ + 120 ℃.
[products with equivalent performance abroad]
This product has the same performance as Mobil shc500.
[precautions]
This product should not be mixed with other oil products, and the original oil products in the hydraulic system should be discharged before use
After washing, refill the product;
During storage, transportation and use, pay attention to prevent harmful substances such as moisture and dust from mixing.
[packaging]
* 4L plastic barrel, 20L, 200L iron barrel.
Previous:4633 phosphate fire resistant hydraulic oil Next:4609 shock absorber
