Contact
Service hotline: 400-688-7804
Tel: 0769-87886500
0769-82621675
Fax: 0769-82621676
Technology: 156-0260-4248 (wechat same number)
Investment promotion: 180-2519-7509 (wechat same number)
Email: jmsha@ssorn.com
jmsh@ssorn.com
website: www.ccjmsh.com
Location:Home > Product Center > High temperature lubricant > > Read
4402 heat setting oil (t230)
Pubdate:2020-01-07 09:07:47
Detailed introduction
summary:
This product is based on synthetic oil and refined with antioxidant and other additives. It can be divided into 4402, 4402-1 and 4402-2 according to the use temperature and viscosity.
[performance features]
It has the characteristics of high viscosity index and good viscosity temperature performance, which can meet the needs of high temperature lubrication of heat setting machine
To ensure the start-up under normal temperature;
High flash point ensures the safety of the heat setting machine;
It has the property of decomposition reaction under the condition of thermal oxidation and cracking into small molecular substances, so as to set the shape
There is little coke deposited on the chain and track of the machine, and the coke cleaning is easy.
[executive standard]
The product meets the following specifications: SH / T 0010-90.
[typical data]
[purpose]
This product is suitable for domestic m751, m771. Zh921 heat setting machine and imported SST resin finishing machine rail and chain lubrication. The maximum operating temperature is 230 ℃.
[precautions]
Do not mix with other greases, physical or chemical reactions may occur between different greases
The performance is greatly reduced;
Timely seal the cover after use to avoid the mixing of moisture, dust and other impurities;
This product has certain evaporation loss under high temperature. When using, pay special attention to open the air duct of the setting machine,
To avoid accidents.
[packaging]
* 4L iron barrel, 20L plastic barrel, 200L iron barrel or packing according to customer's requirements.
This product is based on synthetic oil and refined with antioxidant and other additives. It can be divided into 4402, 4402-1 and 4402-2 according to the use temperature and viscosity.
[performance features]
It has the characteristics of high viscosity index and good viscosity temperature performance, which can meet the needs of high temperature lubrication of heat setting machine
To ensure the start-up under normal temperature;
High flash point ensures the safety of the heat setting machine;
It has the property of decomposition reaction under the condition of thermal oxidation and cracking into small molecular substances, so as to set the shape
There is little coke deposited on the chain and track of the machine, and the coke cleaning is easy.
[executive standard]
The product meets the following specifications: SH / T 0010-90.
[typical data]
Project |
Canonical data |
||
4402 |
4402-1 |
4402-2 |
|
Kinematic viscosity(100℃),mm 2 /s |
32.0 |
35.0 |
72.0 |
viscosity index |
188 |
150 | 220 |
Neutralization value,mgKOH/g |
0.05 |
0.05 |
0.05 |
Flash point (open),℃ |
265 |
265 |
270 |
This product is suitable for domestic m751, m771. Zh921 heat setting machine and imported SST resin finishing machine rail and chain lubrication. The maximum operating temperature is 230 ℃.
[precautions]
Do not mix with other greases, physical or chemical reactions may occur between different greases
The performance is greatly reduced;
Timely seal the cover after use to avoid the mixing of moisture, dust and other impurities;
This product has certain evaporation loss under high temperature. When using, pay special attention to open the air duct of the setting machine,
To avoid accidents.
[packaging]
* 4L iron barrel, 20L plastic barrel, 200L iron barrel or packing according to customer's requirements.
Previous:Sht518 synthetic high temperature chain oil Next:7102 7103 potentiometer damping grease